Tube on Plate Condenser TPC-002

Basic Information

Categories:

Toptek

heat

+86-574-87036969

Detail

Raw Material:

1.Rolling welded steel tube:￠4.76～￠8×0.71

2.Steel plate:SPCC thickness T=0.28～0.40mm

3. Brackets: Steel plate (SPCC) thinkness:T=0.6～2.0mm

Structure:

1.The type of floding drum

2.Welding assembled type

Customized

Wire pitch:≥5mm,We can produce according to the drawing or sample supplied by clients,also help the clients design and produce different condenser used in refrigerator and freezer

Performance

1.Surface with electrophoresis coating to prevent the corrosion.

2.Inner cleaness can meet the requirement of CFC&R134A cooling system.

3.Can satisfy different cooling capability requirements.

Technical Standards
R134a Cooling system tube inside standards
Residual moisture　　≤5㎎/100cm³
Residual Impurity　　　≤10㎎/100cm³
Residual mineral oil　　　≤100mg/100cm³
Residual chlorine　　 ≤5vloppm
Residual paraffin 　　　　≤3mg/㎡
Biggest single impurity 　≤0.5mm

Specification of E-coating
Ckating thickness
Thickness of cathodic electrophoresis coating 15～20μm
Hardness of coating :≥2H
Impact of coating :50cmg.kg/cm impact ,no crack
Adhesion of coating:≥2 grade
Flexiblity of coating around:R=3D bend 1800 no crack or no fall off
Corrosion resistant(salt spray GB2423)
Cathodic electrophoresis coating≥72h

On a

Tube on plate condenser for deep freezer cooling system

The next article

Refrigeration Wire Tube on Plate Condenser TPC-001